XXVII Biennial Symposium on Measuring Techniques in Turbomachinery
Beni Cukurel
Technion – Israel Institute of Technology
UNSTEADY INDUCTION HEATING IN TWO-LAYERED SLABS: AN ANALYTICAL SOLUTION FOR THERMAL RESISTANCE MEASUREMENT IN TBC-COATED TURBINE BLADES
Shani Eitan, Beni Cukurel
Technion - Israel Institute of Technology
ENTROPY ANALYSIS OF DATA REDUCTION METHOD
Terezie Kreuzová, Pavel Šafařík, David Šimurda
Czech technical university in Prague, Faculty of Mechanical Engineering and
Institute of Thermomechanics of the Czech Academy of Sciences, Prague, Czech Republic
ON THE APPLICATION OF BACKGROUND ORIENTED SCHLIEREN (BOS) TO A TRANSONIC LOW-REYNOLDS TURBINE CASCADE
Alexandre Halby, Lorenzo Da Valle, Mizuki Okada, Bora O. Cakir, Gustavo Lopes, Sergio Lavagnoli
von Karman institute for Fluid Dynamics, Belgium
DESIGN AND OPERATION OF AN OPEN JET WIND TUNNEL AT PURDUE UNIVERSITY
Andrea Ruan, Logan Tuite, Lukas B. Inhestern, Adam Moeller, Guillermo Paniagua
Purdue University, United States
DESIGN OF A TEST RIG FOR THE EXPERIMENTAL CHARACTTERIZATION OF BRAYTON HIGH-TEMPERATURE HEAT PUMPS
Matteo Benvenuti, Guido Francesco, Frate Lorenzo Ferrari
Department of Energy, Systems, Territory and Constructions Engineering (DESTEC)
University of Pisa, Italy
DESIGN AND REDUCED ORDER MODELING OF HIGH-SPEED CONTINUOUS WIND TUNNELS
A. Rebassa, M. Butzen, D. Sánchez de la Rosa, J. Grunenwald, G. Paniagua
School of Mechanical Engineering, Zucrow Laboratories, Purdue University, USA
DATA ACQUISITION, CONTROL AND PROCESSING OF THE PURDUE EXPERIMENTAL AEROTHERMAL LABORATORY
Lakshya Bhatnagar, Papa Aye N. Aye-Addo, Michael John Willi Butzen, Guillermo Paniagua
Purdue University, USA
DESIGN OF A NOVEL PROBE FOR OPTICAL DIAGNOSTICS IN HIGH ENTHALPY SUPERSONIC FLOWS
Ignacio Lasala, Aubrey McKelvy, James Braun, Etienne Choquet, Thierry André, François
Purdue University, United States
MBDA, France
TURBULENT CHARACTERISTICS ANALYSIS OF NEAR-CYLINDER WAKE BASED ON DATA-DRIVEN METHODS
Yafei Zhong, Hongwei Ma
Research Institute of Aero-Engine, Beihang University,
School of Energy and Power Engineering, Beihang University, China
DESIGN AND REDUCED ORDER MODELING OF HIGH-SPEED CONTINUOUS WIND TUNNELS
A. Rebassa, M. Butzen, D. Sánchez de la Rosa, J. Grunenwald, G. Paniagua
School of Mechanical Engineering, Zucrow Laboratories, Purdue University, USA
Improvement of the ECL-B3 test rig for better performance and phenomena characterization
Benoit Paoletti, Anne-Lise Fiquet, Alexandra Schneider, Cédric Dubois, Sébastien Goguey, Christophe Brandstetter, and Xavier Ottavy
Université de Lyon, Ecole Centrale de Lyon, CNRS, LMFA, UMR, ECULLY, France
PRELIMINARY STEPS TOWARDS THE RECONSTRUCTION OF PRESSURE FIELDS FROM PIV MEASUREMENTS
Jorge Perez Barcena, Elissavet Boufidi, Manas Madasseri Payyappalli, Fabrizio Fontaneto
von Karman Institute for Fluid Dynamics, Belgium
AN EXPERIMENTAL SETUP FOR THE CHARACTERIZATION OF COMBINED TOTAL-PRESSURE / SWIRL DISTORTION GENERATORS
Manas Madasseri Payyappalli, Jorge Perez Barcena, Elissavet Boufidi, Fabrizio Fontaneto
von Karman Institute for Fluid Dynamics, Belgium
MEASUREMENT OF COHERENT FLOW INSTABILITIES IN THE WAKE OF A COMPRESSOR BLADE AT HIGH INCIDENCE ANGLES
Petr Šidlof, David Šimurda, Jan Lepicovsky
Technical University of Liberec, NTI FM
Demonstrating optical fiber-based sensing technology for impact detection and localization
EGOR LIOKUMOVITCH, ZIV GLASSER, STAS BANK, IDDO KRESSEL,URI BEN-SIMON, Shay Shoham, SHMUEL STERNKLAR, Moshe Tur
Department of Electrical and Electronic Engineering, Ariel University,
PerCiv Advanced Sensing Ltd.,
Aerospace Industry,
School of Electrical Engineering, Tel-Aviv University, Israel.
IN-SITU CALIBRATION OF INFRARED FILM COOLING MEASUREMENTS WITH THE SEED GAS CONCENTRATION TECHNIQUE
Patrick Jagerhofer
Graz University of Technology, Graz, Austria
MACHINE LEARNING-BASED ANOMALY DETECTION IN FULL-SCALE FATIGUE TESTS
Yuval Freed
Israel Aerospace Industries
EXPERIMENTAL 1MW STEAM TURBINE IN DOUBLE-ROTOR CONFIGURATION
Michal Hoznedl, Jindřich Bém, Tereza Kubíková
Doosan Škoda Power s.r.o., Czech Republic
ASSESSMENT OF CANTILEVER PROBE AEROELASTICITY: ENHANCING MEASUREMENT PRECISION IN TURBOMACHINERY
Ioannis Nikolaou, Theofilos Efstathiadis, Anestis Kalfas and Elias Yfantis
Department of Mechanical Engineering, Aristotle University of Thessaloniki, Greece
Cyprus Marine and Maritime Institut, Larnaca and University of Nicosia, Nicosia, Cyprus
DESIGN OF A HIGH-TEMPERATURE REGENERATED BRAYTON HEAT PUMP TEST RIG
Matteo Benvenuti, Guido Francesco Frate, Paolo Taddei Pardelli, Lorenzo Ferrari
Department of Energy, Systems, Territory and Constructions Engineering (DESTEC), University of Pisa,
Spike Renewables Srl, Florence, Italy
DEVELOPMENT OF A TEST STAND FOR ELECTRIC FUEL CELL TURBOCHARGER INTEGRITY TESTING
Georgios Karakasis, Sebastian Kunze, Georgios Iosifidis, Anestis Kalfas
IHI Charging Systems International, Aristotle University of Thessaloniki
A PHASE-BASED METHOD FOR MEASURING LOCAL CONVECTIVE HEAT TRANSFER COEFFICIENTS
William Davis, Nick Atkins
Whittle Laboratory, Department of Engineering, University of Cambridge, UK
EXPERIMENTAL TEST CASES FOR CFD VALIDATION FOCUSED ON AEROENGINE HP AND LP TURBINE APPLICATIONS
Tony Arts
von Karman Institute for Fluids Dynamics, Belgium
CLAUS SIEVERDING A TRIBUTE TO HIS LIFELONG CONTRIBUTIONS TO ACADEMIA, SCIENCE AND TECHNOLOGY
Tony Arts
von Karman Institute for Fluids Dynamics, Belgium